Labtron

Automatic Microtome LAM-A10 is a fully automated microtome, offers adjustable speed with three sectioning modes (Continuous, Step, Single) for users selection. Designed with streamlined molded housing, hand wheel for smooth running and stepping-motor advance technology for fine sectioning and trimming of specimen with selectable specimen retraction. Features, a precise micro motion specimen feeding system, microcomputer controlled optical signal and stepper motor to regulate specimen feeding, and a removable waste tray for specimen dismantling. Automatic Microtome offers, 0.5 μm to 100 μm sec

Type III Water Purification System LHWP-A13 is a modular design which meets the needs of basic laboratory water purifier. It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s. These systems produce and reject water at the same time .Equipped with easy replaceable filters. It’s designed to deliver compliant purified water with clear quality parameters and care free maintenance

Fully-automatic Kjeldahl Analyzer LKA-C10 conducts titration and distillation simultaneously so as to neutralize the ammonia gas released which enhance the test efficiency and avoid the overflow of ammonia. It stand with a measuring range from 0.1 to 200 mgN which gives a maximum recovery of ≥ 99.5 %. The operating ambient temperature of the device starts from 10 °C to 35 °C. 8.0-inch LCD touch screen is used to set the distillation time, the amount of diluent, acid liquor and alkali. Diaphragm pump is used to add reagent so that the injure caused by high pressure pump can be neglected. Wirel

Automatic Potentiometric Titrator LPTT-A11 is equipped with burette valve integrated design, to avoid mutual interference of different titrimetric solutions. Built in with large and bright LCD screen display. During operation, stirring system is adopted for adjusting the stirring speed. Microprocessor controlled system automatic potentiometric titrator is designed to make performing titrations easier, more reproducible and more reliable than manual titrations. It performs automatic identification of pH standard solutions, also supports manual identification.

Microwave Digestion System LMWD-B11 is newly designed and fully upgraded with higher performance and safer protection system. Vessel quantity of 10 and vertical design for even distribution of microwave with multi safety protection functions. Equipped with contactless sensor monitoring with no burst disk design saves consumables cost and maintenance cost. Designed with 7 inch color touch screen with user-friendly interface for easy operation. Material used TFM material for inner vessel and PEEK glass material for outer vessel prevents corrosion. Offers free temperature and pressure measuremen

Fiber Analyzer LFBA-A10 is designed with hidden solution, advance barrel pull structure to facilitates dosing operation, provide flexible, and safe fiber analysis. Advanced integrated infrared heating technology offers fast uniform heating of the crucible, more consistent sample extraction, higher extraction recovery, improved accurate test results. The crucible recoil function designed to prevent sample in the crucible cannot caking filtration. It can analyse crude fiber and Van Soest analysis to wash the fiber.

Bench top turbidity meter (with built-in printer) LTM-C12 comes with microprocessor controlled system, works on 90° scattered light principle to measure water turbidity in nephelometric turbidity unit i.e. NTU. The formazine standard solution of turbidity mentioned in ISO 7027 is used for turbidity analysis. This turbidity meter delivers highly accurate results with better numerical calculations to meet GLP standards.

Garments Moisture Meter LGMA-A10 is also called as Textile Moisture Meter. It offers 0 to 40 % measuring range. The scanning depth is 50 mm and 0.1 % resolution. Features with non-destructive testing just the probes touch the surface being measured, that is able to display the current moisture content, without damaging the object to be detected. It offers advanced sensors, moisture measurements of cotton, polyester, linen, and velvet, wool, and acrylic, polypropylene fiber, pure or blended.

Labtron LDMT-A10 density tester is simple and compact. The control box adopts humanized design and the control switch adopts light-touch mode. The instrument is designed and made as per ASTM D1298 “Test Methods for Density of Petroleum and Liquid Petroleum Products (Densimeter Methods)”.

Atomic absorption spectrophotometer comes with Deuterium lamp for background correction, RS232 interface, Multi-linear and nonlinear curve fitting. Its double beam system automatically compensates the light source drift and wavelength drift caused by the variation of temperature and electronic circuit drift so as to reach a good basic line stability. The specially designed fine light beam passes through the flame to ensure a high precision analytical test and low characteristic concentration in this atomic absorption spectrophotometer. It has multiple applications in research and development

Integrated Industrial Ultrasonic Cleaner LIUC-A10 is a 38 L capacited unit integrated with industrial based transducer and a powerful ultrasonic generator providing efficient high level tabletop cleaning. With a cleaning duration of 1 ~ 99 mins efficient intensive cleaning of instruments and products is done making them contamination, rust and germ free. Its key feature is the variance of using it at 28 KHz for gross rinse to 40 KHz for intensive rinse.

Elemental (CHN) Analyzer LCHN-A10 is used to determine Carbon, Hydrogen and Nitrogen in macro amount of samples. Features dual stage furnace with pure oxygen flow for complete combustion, multiple detector, blended gas analysis, IR CO2 monitor detector, stackable auto loader etc. to ensure efficient performance and obtain reliable results.

It offers high throughput with 3 shaking modes, fast reading speed of 5 seconds and malfunction alarm system along with 96-well multimode and bichromatic multi-channel optical system. Different detection modes like comprehensive qualitative and quantitative data-evaluation functions with cut-offs, curve-fits and transformation formulas are available. It is a basic tool in drug detection and life science research, bioassay testing and quality control pharmaceutical processes.

Semi-automatic Biochemistry Analyzer LSBA-A11 also known as chemistry analyzer is a tabletop unit, offers absorbance ranges from -0.3 to 3.0 abs and temperature accuracy of ± 0.1°C. Equipped with different wavelengths such as 340 nm, 405 nm, 510 nm, 546 nm, 578 nm, 620 nm + 2 free positions. Incorporated with standard interface for communication, convenient for data processing and transmitting. It provides easy, quick and accurate diagnosis of diseases, blood samples and other body fluid, identification of gene disease and evaluation of organ function.

Standard Freeze Dryer LPFD-C10 is designed to handle lyophilization needs for scale up production. Equipped with 10 kg condenser capacity and a temperature of -80 °C for effective lyophilization. It's ideal for freeze drying samples with low eutectic temperatures. The temperature controllable shelves are designed for complete moisture removal and storage facilities of various biological materials. Precise vacuum control enables faster freeze drying and reproducible results.

Automatic Colony Counter LCCA-A10 is equipped with high resolution CCD Camera lens. Incorporated with advanced Smart Counter software for accurate automatic microbial colony counting. Open platform design, bottom LED light source makes it user friendly counter. Encrypted USB-key guarantees data security, and convenient data management.

Fluorescence Spectrophotometer LFS-A12 consist of a high quality 150 W Xenon light source and photoelectric multiplier tube detectors for providing sufficient light intensity signal to detect sensitivity which ranges between 200 nm to 900 nm. Features fluorescence detection limit of ≤ 1×10-10 g/ml and Water Raman peak of S/N ≥ 150. It consists of the following characteristics, namely, high detection sensitivity, fast scanning speed, high dynamic range, fast 3D scanning, etc. The main principles includes measurement of absorption and fluorescence. Absorbance measurements can be taken via one o

Dissolution tester LDLT- A16 is adopted with microprocessor controlled technology, automatically controls the temperature, time and rotation speed of experiment. The vessels and poles are fitted in backward or front position. The basket and paddle units of these dissolution tester are made of high quality SUS316L stainless steel. Equipped with magnetism-pumped circular water current, maintains uniform temperature of the liquid throughout the water bath.

Vacuum oven LVO-B13 comes with 125 L chamber capacity and dual layer tempered glass door for clear observation of the sample during process. The vacuum degree controlled by full-automatic electromagnetism valve which make the degree control more exact. Designed with vacuum pump as standard accessory and LCD digital display to observe temperature. The outer of the oven is made using stainless steel sheets that are enamel and painted to prevent from corrosion. Designed for drying of materials that are heat sensitive, reactive with oxidation reactions, prone to contamination due to excess water

Digital Refractometer LDRF-A12 is a benchtop unit used to measure refractive index of transparent or translucent solid, liquid substances and also to measure percent of sugar in solutions. Features LCD display, auto-correction mode, tough prism, interface for printer etc. to ensure accurate measurements. It is used in medical laboratories, chemical laboratories, microbiology, clinical research, hydrology, food processing etc.